Common-Rail
Equipment for testing Common Rail injectors
DL-CR30479KIT
- Description
- Package contents
- Extra
DL-CR30479KIT. Pressure accumulator (Rail) for testing pumps and injectors
Rail has threaded holes for:
- connection to the pressure sensor М24х1,5 (1 hole)
- connection to the backleak М12х1,5 (1 hole)
- fluid supply and exit from Rail М14х1,5 (3 holes.)
- connection to the safety valve М20х1,5
- pressure relief in the event of excess М12х1,5
- mounting of manometer М6 (2 blind holes.)
- mounting of the rail М8 (4 blind holes)
ATTENTION! Pressure regulators and pressure sensor are NOT included in the delivery set! The pressure sensor is connected via an M14 to M18 adapter fitting.
| No. | Purt Number | Name | Qty | Image |
|---|---|---|---|---|
| 1 | DL-CR30479 | Pressure Accumulator (Rail) | 1 pc |  |
| 2 | DL-UNI30497 | Plug instead of pressure regulator | 1 pc |  |
| 3 | DL-CR30493 | M20x1.5 Male Plug. Replaces the pressure relief valve on the pressure accumulator (rail). | 1 pc |  |
| 4 | DL-UNI30218 | M14x1.5 x M14x1.5 High-pressure fitting supplied with sealing washers DL-SHP15084 | 3 pc |  |
| 5 | DL-UNI50271 | Plug for high-pressure fitting DL-UNI30218 | 3 pc |  |
| 6 | DL-UNI30796 | M14 to M18 Thread Adapter. For installing a pressure sensor in pressure accumulators: DL-CR30479, DL-CR30180, DL-CR30526, DL-CR30878, DL-CR30777. | 1 pc |  |
| 7 | 22-HS-06 | M12x1.5 Banjo Bolt Fitting for Return Line Connection, Port Located Next to the Pressure Regulator | 1 pc |  |
| 8 | 22-RSN-06 | 12mm x 8mm Banjo Fitting with Barb for Return Line Connection | 1 pc |  |
| 9 | D-GM1537AN | 12mm Rubber-Metal Washer. Installed on the DL-UNI30636 plug, 22-HS-06 banjo bolt, and similar components to ensure a leak-proof connection. | 2 pc |  |
*Instead of the 12mm x 8mm banjo fitting 22-RSN-06, the M12x1.5 x 8mm fitting 34-R0608M12X1.5 can be used, allowing return flow through the P1006 Teflon tube. More details can be found in the Additional Equipment tab.
| No. | Purt Number | Name | Application | Image |
|---|---|---|---|---|
| Fittings, Plugs, and Bracket for Pressure Accumulators (Rails) | ||||
| 1 | DL-UNI31498 | High-pressure fitting M14x1.5 x M12x1.5 | Pressure accumulator |  |
| 2 | DL-UNI50275 | M12x1.5 Female Plug | Fitting DL-UNI31498 |  |
| 3 | DL-UNI30529 | M14x1.5 Male Plug (replaces high-pressure fitting DL-UNI31498 or DL-UNI30218) | Pressure accumulator |  |
| 4 | D-GM1538AN | M14 Rubber-Metal Washer (Seal) 14.70 x 22.00 x 1.50 mm | Installed on the DL-UNI30529 plug, 22-HS-08 banjo bolt, and similar components to ensure a leak-proof connection |
 |
| 5 | DL-CR50268 | Pressure Accumulator Bracket |  |
|
| Adapters for High-Pressure Filter, Pressure Sensor, and Relief Valve | ||||
| 6 | DL-CR50121 | Adapter for High-Pressure Fuel Filter DL-UNF21100 | Mounted in the pressure accumulator (rail) instead of the standard fitting DL-CR30181, DL-CR30522, DL-CR30188, DL-CR31053, DL-CR31049, DL-CR31257, DL-CR30180, DL-CR30479, DL-CR30526, DL-CR30878, DL-CR30777. |
 |
| 7 | DL-UNI50453 | High-pressure filter M14x1.5 – M14x1.5 | Mounted in the pressure accumulator (rail) instead of the standard fitting DL-CR30181, DL-CR30522 , DL-CR30188, DL-CR31053, DL-CR30180, DL-CR30479, DL-CR30526, DL-CR30878, DL-CR30777, DL-CR31068 |
 |
| 8 | DL-UNI30650 | Adapter for Pressure Relief Valve | Installs into pressure accumulators: DL-CR30181, DL-CR30522 , DL-CR30188, DL-CR30180, DL-CR30479, DL-CR30526 |
 |
| 9 | DL-UNI30796 | M14 to M18 Thread Adapter | For installing a pressure sensor in pressure accumulators: DL-CR30479, DL-CR30180, DL-CR30526, DL-CR30878, DL-CR30777 |
|
| 10 | DL-UNI30828 | Adapter with Bosch high-pressure filter for testing CP2-CP4 pumps, mounts on the rail. | Installs into the pressure accumulator (rail) in place of the standard fitting DL-CR30479, DL-CR30180, DL-CR30181, DL-CR30188, DL-CR30522, DL-CR31053, DL-CR30526 |
 |
| Banjo Fittings for Pressure Accumulators and Other Hydraulic Components of Test Stands: | ||||
| Article | Name | Image | ||
| 11 | DL-CR20062 | Kit (12mm Banjo Fitting + M12 Bolt + Rubber-Metal Washers) for 8mm Hose (Zinc) |  |
|
| 12 | DL-CR20064 | Kit (14mm Banjo Fitting + M14 Bolt + Rubber-Metal Washers) for 8mm Hose (Zinc) |  |
|
| Galvanized Fitting Bolts: | ||||
| 13 | 22-HS-08 | Hydraulic Banjo Bolt M14x1.5mm |  |
|
| 14 | 22-HS-10 | Hydraulic Banjo Bolt M16x1.5mm |  |
|
| 15 | 22-HS-13 | Hydraulic Banjo Bolt M18x1.5mm |  |
|
| 16 | 22-HZ-08 | Hydraulic Banjo Bolt 1/4″ |  |
|
| 17 | 22-HZ-10 | Hydraulic Banjo Bolt 3/8″ |  |
|
| 18 | 570RLP-08-08 | Hydraulic Banjo Bolt 1/2″ |  |
|
| Black Oxide Fitting Bolts: | ||||
| 19 | DL-UNI30908 | M16x1.5mm Banjo Bolt Fitting |  |
|
| 20 | DL-UNI30364 | 1/4″ Banjo Bolt Fitting |  |
|
| 21 | DL-UNI30363 | 3/8″ Banjo Bolt Fitting |  |
|
| 22 | DL-UNI30350 | 1/2″ Banjo Bolt Fitting |  |
|
| Galvanized Banjo Fittings: | ||||
| 23 | 22-RSN-08-06 | 14mm Banjo Fitting with 8mm Barb |  |
|
| 24 | 22-RSN-08 | 14mm Banjo Fitting with 10mm Barb |  |
|
| 25 | 22-RSN-10 | 16mm Banjo Fitting with 11-12mm Barb |  |
|
| 26 | 22-RSN-13 | 18mm Banjo Fitting with 13-14mm Barb |  |
|
