Common-Rail
Equipment for testing Common Rail injectors
DL-CR31068KIT
- Description
- Package contents
- Extra
DL-CR31068KIT. Pressure Accumulator (Common Rail) with Cooling System for CR Injector and Pump Testing
Featuring connections for two pressure regulators, a pressure sensor, a safety valve, and a forced cooling line.
Standard equipment for CRUIS test benches.
ATTENTION! Pressure regulators and pressure sensor are NOT included in the supply package!
| № | Part Number | Item Name | Quantity | Image |
| 1 | DL-CR31068 | Pressure Accumulator | 1 pc |  |
| 2 | DL-CR30493 | M20x1.5 Male Threaded Plug (for replacing the safety valve on pressure accumulator rails) | 1 pc |  |
| 3 | DL-UNI30497 | Blank Plug / Blanking Plug for the Pressure Regulator Port | 2 pc |  |
| 4 | DL-UNI30162 | M18x1.5 Plug for Pressure Sensor Port | 1 pc |  |
| 5 | 34-RL310802 | G1/4″ to 8mm Angled Fitting with Collet Clamp for Return Line | 2 pc |  |
| 6 | P1006 | Teflon (PTFE) Tube, 8mm OD x 180mm Long | 1 pc |  |
| 7 | DL-UNI30293 | 1/8″ to 8mm (Barbed) Fitting for Cooling Hose Connection | 2 pc |  |
| 8 | DL-UNI30112 | M12 to 8mm (Barbed) Fitting for Return / Leak-Off Hose Connection | 1 pc |  |
| 9 | D-GM1537AN | Rubber-Metal Washer, 12mm ID, for sealing DL-UNI30112 and similar parts | 1 pc |  |
| 10 | DL-UNI30218 | High-Pressure Fitting M14x1.5 to M14x1.5, supplied with sealing washers DL-SHP15084.
(Also, M14x1.5 to M12x1.5 fittings may be installed as alternatives.) |
2 pc |  |
| 11 | DL-UNI50271 | High-Pressure Fitting Cap for DL-UNI30218
(For transport, plastic caps may also be used.) |
2 pc |  |
| 12 | DL-SHP15084 | Sealing Washer for Caps, Pressure Sensors, and High-Pressure Fittings | 1 pc |  |
| No. | Article | Name | Application | Image |
|---|---|---|---|---|
| Fittings, Plugs, and Bracket for Pressure Accumulators (Rails) | ||||
| 1 | DL-UNI31498 | High-pressure fitting M14x1.5 x M12x1.5 | Fuel Rails |  |
| 2 | DL-UNI50275 | M12x1.5 Female Plug | Fitting DL-UNI31498 |  |
| 3 | DL-UNI30529 | M14x1.5 Male Plug (replaces high-pressure fitting DL-UNI31498 or DL-UNI30218) | Fuel Rails |  |
| 4 | D-GM1538AN | M14 Rubber-Metal Washer (Seal) 14.70 x 22.00 x 1.50 mm | Installed on the DL-UNI30529 plug, 22-HS-08 banjo bolt, and similar components to ensure a leak-proof connection |
 |
| 5 | DL-CR30493 | M20x1.5 Male Plug | Replaces the pressure accumulator relief valve |
 |
| 6 | DL-CR10029 | Pressure Accumulator Bracket |  |
|
| Adapters for High-Pressure Filter, Pressure Sensor, and Relief Valve | ||||
| 7 | DL-CR50121 | Adapter for High-Pressure Fuel Filter DL-UNF21100 | Mounted in the pressure accumulator (rail) instead of the standard fitting DL-CR30181, DL-CR30522, DL-CR30188, DL-CR31053, DL-CR31049, DL-CR31257, DL-CR30180, DL-CR30479, DL-CR30526, DL-CR30878, DL-CR30777. |
 |
| 8 | DL-UNI50453 | High-pressure filter M14x1.5 – M14x1.5 | Mounted in the pressure accumulator (rail) instead of the standard fitting DL-CR30181, DL-CR30522 , DL-CR30188, DL-CR31053, DL-CR30180, DL-CR30479, DL-CR30526, DL-CR30878, DL-CR30777, DL-CR31068 |
 |
| 8 | DL-UNI30650 | Adapter for Pressure Relief Valve | Installs into pressure accumulators: DL-CR30181, DL-CR30522 , DL-CR30188, DL-CR30180, DL-CR30479, DL-CR30526 |
 |
| 9 | DL-UNI30796 | M14 to M18 Thread Adapter | For installing a pressure sensor in pressure accumulators: DL-CR30479, DL-CR30180, DL-CR30526, DL-CR30878, DL-CR30777 |
 |
| 10 | DL-UNI30828 | Adapter with Bosch high-pressure filter for testing CP2-CP4 pumps, mounts on the rail. | Installs into the pressure accumulator (rail) in place of the standard fitting DL-CR30479, DL-CR30180, DL-CR30181, DL-CR30188, DL-CR30522, DL-CR31053, DL-CR30526 |
 |
| Banjo Fittings for Pressure Accumulators and Other Hydraulic Components of Test Stands: | ||||
| Article | Name | Image | ||
| 11 | DL-CR20062 | Kit (12mm Banjo Fitting + M12 Bolt + Rubber-Metal Washers) for 8mm Hose (Zinc) |  |
|
| 12 | DL-CR20064 | Kit (14mm Banjo Fitting + M14 Bolt + Rubber-Metal Washers) for 8mm Hose (Zinc) |  |
|
| Galvanized Fitting Bolts: | ||||
| 13 | 22-HS-08 | Hydraulic Banjo Bolt M14x1.5mm |  |
|
| 14 | 22-HS-10 | Hydraulic Banjo Bolt M16x1.5mm |  |
|
| 15 | 22-HS-13 | Hydraulic Banjo Bolt M18x1.5mm |  |
|
| 16 | 22-HZ-08 | Hydraulic Banjo Bolt 1/4″ |  |
|
| 17 | 22-HZ-10 | Hydraulic Banjo Bolt 3/8″ |  |
|
| 18 | 570RLP-08-08 | Hydraulic Banjo Bolt 1/2″ |  |
|
| Black Oxide Fitting Bolts: | ||||
| 19 | DL-UNI30908 | M16x1.5mm Banjo Bolt Fitting |  |
|
| 20 | DL-UNI30364 | 1/4″ Banjo Bolt Fitting |  |
|
| 21 | DL-UNI30363 | 3/8″ Banjo Bolt Fitting |  |
|
| 22 | DL-UNI30350 | 1/2″ Banjo Bolt Fitting |  |
|
| Galvanized Banjo Fittings: | ||||
| 23 | 22-RSN-08-06 | 14mm Banjo Fitting with 8mm Barb |  |
|
| 24 | 22-RSN-08 | 14mm Banjo Fitting with 10mm Barb |  |
|
| 25 | 22-RSN-10 | 16mm Banjo Fitting with 11-12mm Barb |  |
|
| 26 | 22-RSN-13 | 18mm Banjo Fitting with 13-14mm Barb |  |
|
